Proper swimming pool water treatment

          Swimming pool water treatment is an activity that occurs most often during the operation of the swimming pool. It helps the swimming pool clean, quality and timely solve the infection, moss, algae. So how to properly process the swimming pool? Please refer to the following article.

Why treat pool water?

 Swimming pools are like a common basin of many people, the only thing is the water treatment system works regularly to bring the best water quality, ensure hygiene and health for swimmers. However, if the water treatment is not correct or there are no proper measures to treat the swimming pool , the invisible pool you are making your home degrade, infection and stimulate the strong growth of algae. .

      Swimming pools, especially outdoor pools, are directly affected by swimmers, debris, body wastes, sunshine, acid in rain water … All will be deposited in the pool The ingredients in the tank cause pH imbalance, promote moss, make turbid water, fishy, ​​infectious.

      When the water quality in the swimming pool is not guaranteed, swimming in the environment is a threat to skin diseases, red eyes, itchy eyes, septic infections … Therefore, the task is to be regular. Hygiene and treatment of swimming pool water. Depending on the characteristics and condition of the water for timely treatment. Cleaning of swimming pool water should also follow the technical process to ensure that all the facilities are functioning properly and efficiently.

Chemicals – Swimming pool water treatment equipment needed

To ensure a quick and easy swimming pool treatment besides using the pool water filtration system, we also need the following important swimming pool water treatment facilities :

1. Swimming Pool Water Treatment Chemicals  : PAC, PH +, PH-, Clo …
2. Ancillary equipment such as: bottom collector, trough, sanitary suction …
3. The sanitary equipment pool : Rackets trash, aluminum pole, brush, sanitary suction 8 cake desk, Hoses, robot swimming pool cleaners …

    This is considered to be the cleaning and swimming pool equipment that pool owners will need daily to ensure the swimming pool.

Proper swimming pool water treatment

         The process of swimming pool water is an important issue that any owner of swimming pool knows to be able to perform the best, thoroughly. However, swimming pool water can have many different phenomena, so depending on the specific case to have the best method of swimming pool water treatment .

Swimming pool water treatment – Chlorine water swimming pool treatment

       Swimming pools, especially outdoor pools, are considered one of the most polluted places. These pools are often exposed to the outside environment, are susceptible to contamination by dirt, germs, spores and spores in rainwater, body waste, etc. Therefore, the pool must be treated. Use chemicals before use. The indispensable ingredient in swimming pool water usually consists of chlorine . This is a chemical used to disinfect, destroy the components that cause water pollution.

       Chlorine is usually used in powder form or in tablet form. Hypochlorous acid is easily broken down when exposed to ultraviolet light from sunlight. Therefore, in order to ensure effective water treatment of the tank, cyanuric acid is usually added, reacting with free chlorine in hypochlorous acid to form a more stable compound. And to maintain the pH balance of pool water, alkaline chemicals such as sodium carbonate or sodium bicarbonate are used. A standard pool must have an average pH of 7.2 – 7.8.

       The treatment of chlorinated swimming pool water  must comply with safety standards. Too much chlorine will cause pH imbalance, excess chlorine in the pool water will cause the smell of chlorine, respiratory discomfort. Many chemicals also irritate the skin, redness and irritations, irritation or redness on the skin.

     It is best to use a chemical cartridge to automatically adjust the amount of chlorine that is best for you.

Treatment of swimming pool with algae

     Long-lived swimming pools, or unhygienic pool cleaners, or direct sun-exposed swimming pools are good environments for algae to grow. To treat swimming pool water when the moss, algae you need to perform the following procedures:

    First, balance the pool water and pay close attention to the pH of the water. Use chlorine to maintain the pH in water, ensuring that in the standard allowed from 7.2 to 7.6.

        Check the circulation and purification system, avoid algae algae cause filter plug filter. It is best to clean the filter, brush in the flask, filter bag, use the cleaning equipment to clean.

         Need to fight the walls and bottom of the tank, especially for the main gate to run  algae algae on which cause slipping to the user. Note strong and careful for the black algae and algae because these are usually strong adhesion.

      Add algae and algae to clean the algae also clinging to the tank wall with a brush once again to the end. Then check the tank, and balance if necessary.

Water treatment of turbid swimming pool

       Pool water can be chiseled for a variety of reasons. However, we have three main causes of turbid pool water:

1. By environment: Environment pollution, dirt easily make your swimming pool cool, dull aesthetics
2. Due to the water purification system: The inefficient swimming pool water filtration system has led to the fact that the swimming pool water treatment is slow or unable to completely treat the swimming pool water resulting in turbid swimming pool conditions.
3. Due to pool chemicals: Pool chemicals work very well in swimming pool water treatment. However, the use of over-the-counter chemicals will also have a significant effect on swimming pools and users

To treat turbid swimming pool water we can use the following ways:

1. Use water filtration systems pool quality, high durability, performance stable, especially two important devices hold an essential role in the operation of the pool is: Pump Pool and Pool filter . Some brands of pool pumps and swimming pools we can trust: Kripsol (Spain), Procopi (France)
2. Control swimming pool chemicals just enough to use
3. Use the PAC support to dump dust into the bottom of the tank so that it can be easily cleaned
4. Use the eight-wheel Minder or pool cleaning robot to clean the tank

Some of the fastest ways to identify and treat swimming pools

       Blurry Water Water: Check CLO and PH for equilibrium, if CLO or PH is high due to uneven diffusion or high water content of the tank. When this happens, operate a high capacity filter system and operate continuously for 6 to 8 hours a day.

        The lichen, greenish-green lake water should be tested for pH balance if low is due to the high rate of moss and many debris in the water. By raising the CLO in water to the highest level, ATRINE can be used to increase efficiency. Combined running high capacity filter.

       The lake water is black, silver, and bluish, and if the CLO and PH are low, then raise the standard and run the filter for stability. If the phenomenon repeatedly must see the filter system, tunnel balancing … specifically sand filter, because the amount of sand and gravel is lost due to washing, so filtering efficiency is not high, then should replace the new filter.

      Lake water is light tea color, or light red brick if the pH is balanced, then the source of water can be tested can be pond water, the lake contains many metals such as iron, mg .. The source of water added to the lake. PH stabilization and acid testing, hardness in water.

     Above is the process of swimming pool water properly. For support better information please contact Co. PT !

 Address: 322 Binh Loi Street, Ward 13, Binh Thanh District, HCMC 
Tel: 028.66573636 / 0902.964.541 
Mail: info@pttec.vn – ptwater.vn@gmail.com