PT – Detailed instructions on how to clean the pool filter simply and effectively

he sand filter used in the pool for a long time is dirty, affecting the quality of water filtration. Therefore you should periodically check and hygiene to extend product life.

When do I need to clean the pool sand filter?

After a long time of use, if your family swimming pool is not regularly cleaned, the dirt and debris will accumulate in large patches. Meanwhile, these wastes will cause congestion, affecting the performance of sand filters or water pumps … and from here the pool water quality will also not ensure hygiene and safety.

herefore, to ensure the quality of pool water, you should check and clean regularly from 2-3 times / week (depending on the number of people using the pool. Of course, many users need it. must be cleaned more. So, you can calculate the amount of contamination affecting performance filters and conducted hygiene filter when necessary.
the hygiene filter sand schedule not only helps performance The work of the machine is stable, the water quality is guaranteed but also extends the life of the swimming pool equipment , so you should pay attention to clean regularly.

The process of cleaning the sand filter tank is standard, safe and effective

– Step 1: Remember to turn off the water pump, adjust the valve back to BACKWASH backwash mode, then open the BACKWASH water inlet, turn on the pump and check the “observation glass” to see if the water has returned? Now you can busy the machine from 5 to 10 minutes depending on the performance of the sand filter.
– Step 2: Turn the valve to the position of backwashing to help wash away the debris on the sand filter that is easily washed away.
– Step 3: Check the waste water pipe so that it is in the right position (avoid the case that it is in the wrong position that may cause the water to overflow, making it difficult to clean or dirty water coming back into the machine. obstacles)
– Step 4: Open the power and turn on the pump from 2-3 minutes to filter corrects jacuzzi reverse filter clean.

(Normally, the pool water will go through the pipe and flow into the top of the filter, through the sand and out at the bottom of the tank. However in BACKWASH mode, the water is pushed from the bottom to the top, remove dirt, residue from the filter and comfortably through the waste water of the bottle)
– Step 5: Turn off the power of the machine
– Step 6: After cleaning, turn the valve back to the washing position, turn on the pump and Let the machine run for about 1 minute and monitor and check the situation after that. If an error occurs or the water is not clean, immediately fix it. And in case everything went oki then.
– Step 7: Turn off the machine, turn the valve back to the filter position as the original. Finish cleaning the filter.

Some important considerations when cleaning the filter:

– When the pressure gauge is near the red line (that is, the pressure gauge has increased to 20KPA), at this time you must clean the pool filter.

– The pump must be turned OFF before all the filter operating mode switches.
– Absolutely DO NOT turn on the pump when the filter valve is in CLOSE mode. Because it will cause broken water pipes and affect the operation of the filter.
– Every time BACKWASH is made with only 1 filter and must simultaneously unlock the pipeline BACKWASH valve.
– RECICULATION mode can be used for the purpose of: do not want water through the sand filter. At that time, the pump will suck water directly from the pool and return it to the pool without going through the filtration system.
———————————————
If your head has difficulty using the equipment as well as how to operate and clean the pool sand filter, you can ask for the help of the pool maintenance and maintenance team. They will help you do the job on the safest and most accurate way. After that, you can learn how to do it yourself so you can clean yourself and save money.
Currently on the market there are many units that provide “maintenance” for swimming pools, so you can be assured and choose the most prestigious unit to help you. PT TRADING TECHNOLOGY CO. LTD Company is also a dedicated unit with customers in the field of pool equipment repair and maintenance. Whenever you need it, we are on hand to help you.
In addition, PT is also responsible for the design and construction of the pool , supply and installation of swimming pool equipment, so you can be assured of their experience and experience.

PT TRADING TECHNOLOGY CO. LTD

Address: 322 Binh Loi, Ward 13, Binh Thanh District, Ho Chi Minh City
Tel: 028.2253.9200 / 0986 215 005/0975 09 12 12
Mail: sales03.pt@gmail.com – vokien.pt@gmail.com